PARTSCASTERS FOR SALE

"Oh my God - I love this tele!!! So light, feels great, sounds awesome!!! Thanks again man!!!"

B.D. Lenz - www.bdlenz.com





DESIGN YOUR PARTSCASTER

I mostly use pre-finished GFS p-wood - Paulownia, "P-Wood" or "Princess Wood", is a true ultra light hardwood that's grown in both asia and the USA, and is used extensively in fine acoustic instruments. The tone and resonance is superb, and playing an unplugged Tele® or Strat® yields a very acoustic-like tone. Other body woods, such as alder, ash and mahogany, can be used as well!

Couple the body with the AllParts Fender® Japan neck of your choice, the best deluxe vintage tuners, vintage Wilkinson compenstated brass saddle (Tele®) or vintage Wilkinson trem bridge (Strat®), pickguard or your choice - or none at all!

Top shelf electronics includes CTS pots, CRL and Oak switches and Switchcraft jacks, along with the superb vintage Cavalier pickups - or the pickups of your choice! - and have a custom guitar that will weigh under six pounds total weight, and be ready for stage or studio - no bs, no hype, just a killer, resonant Tele® or Strat® that works for you - for stage, recording studio or living room jams.

Either I, or you, or both of us can supply any
or all parts for your Tele® or Strat® build!

Click HERE for a "parts list" to help with your partscaster requirements.


The Stock Partscaster Tele® or Strat®

Using any GFS prefinished Paulownia wood Tele or Strat body, and a pre-finished AllParts Fender® Tele® or Strat® neck, along with ...
.
Tele®
Wilkinson or Gotoh deluxe vintage tuners, vintage bone nut, s/s neck screws, chromed brass neck plate, solid color pickguard, Wilkinson vintage Tele® 3 brass barrel compensated saddle bridge, chrome string ferrules, Tele® chrome control plate, CRL or Oak or Tritan 4-way or 3-way pickup switch, Electrosocket switch cup and Switchcraft jack, CTS 250k pots - master volume and no-load tone w/.022uf cap, chrome dome Tele® knobs, chrome strap buttons, Cavalier Lion Tele® bridge pickup and Cavalier Tiger Strat® neck pickup, string gauge of your choice. $550 + shipping/ins from NJ 07656


Strat®
Wilkinson or Gotoh deluxe vintage tuners, vintage bone nut, s/s neck screws, chromed brass neck plate, solid color pickguard, Wilkinson vintage Strat® trem bridge, CRL or Oak or Tritan 5-way pickup switch, CTS 250k pots - master volume and master no-load tone w/.022uf cap and neck pup blender volume pot, Strat® pot knobs, chrome strap buttons, plastic covered or cord wrapped Cavalier Tiger Strat® pickups w/RWRP middle pup, string gauge of your choice. $590 + shipping/ins from NJ 07656




Fret Level & Crown?
Fret leveling and crowning ("L&C") is a labor intensive process that makes all the frets as level as possible to one another - the same height above the fretboard.

Afterwards the fret tops are re-radiused ("crowned") and polished so that the strings will meet the frets at one small mid point for best intonation, tone and smooth feel of the fretted strings. No commercial stock guitars are sold with fret leveling and crowning, and most manufacturers do not offer that service. So, you're on your own and will need to seek out a luthier/guitar tech IF your frets need an L&C.

For the very most part, with a "medium to medium low" guitar action, even if the frets are slightly out of level, an L&C isn't required. This is particularly true for the superb Fender® Japan necks. For the lowest action and playbility that any guitar can offer, an L&C is simply a necessary and mandatory requirement.

For any partscaster I create, an optional L&C can be requested at the time of the assembly or within one week of receiving the guitar, at half the normal cost - $50 for a non-maple fingerboard and $60 for a maple fingerboard.



Visit the GFS website for a complete listing of in-stock Tele® or Strat® bodies.

Visit the All Parts website for a complete listing of in-stock Tele® or Strat® necks.


... Completed "Stock" Partscasters for Sale ...


SOLD! Esquire® partscaster, GFS Paulownia body w/bound flame natural maple top body, AP Fender® Japan TMO-FAT vintage 50's neck w/flat matte 'raw' ambered clear finish (1.662 inch nut width, .082x.050 frets, 1 inch thick at the first fret, 9.5 inch radius), classic gotoch deluxe vintage tuners, vintage bone nut, Wilkinson compensated brass saddle vintage bridge (supports both rear and top loading), leopard Esquire® pickguard. Cavalier Lion Esquire® pickup, CTS 250k pots, CRL 3-way pup switch (pickup w/no tone pot, pickup w/tone pot & .022uf cap, pickup w/.0047uf cap) - positions: (1) raw pickup tone, (2) pickup and tone pot, (3) pickup & .0047 'cocked wah' tone cap . Electrosocket Switchcraft jack. Total weight = 5lbs 14.5ozs. Setup with the string gauge of your choice (currently has GHS nickel rocker 11-50). This is one killer Esquire® that covers lots a lot of tones perfect for rock, country, blues 'n' pop. Ready for stage, studio or that comfy living room sofa.




SOLD!



SOLD! GFS paulownia hardwood light and resonant body in cherryburst with bound flame maple top, Fender® ; Japan satin amber finish TMO-C solid maple fingerboard neck (1.666 inch nut width, .860 inch thick at the 1st fret, 9.5 inch radius, 085 x.047 frets), vintage Asiatic ox bone nut, Gotoh classic vintage tuners, Wilkinson compensated brass saddle bridge, CTS 250k pots w/chromed brass barrel knobs (tone pot is a no-load), CRL 4-way pickup switch (bridge, bridge+neck in parallel, bridge+neck in series, neck), Electrosocket jack cup and Switchcraft jack, GFS Neo-Vin AlNiCo Tele neck pup, DiMarzio Twang King bridge pup. Note: there is a small 1/8" ding near the front strap button, see the pic. As a result of that ding, this Tele is discounted $60. Setup with LaBella HRS 10-46 round wound nickel strings - ready for stage, studio or living room. Total weight is 5 pounds 10 ounces.




SOLD!



SOLD! GFS paulownia hardwood light and resonant body in "daphne blue", Fender® ; Japan semi-gloss clear finish TRO-W rosewood fingerboard maple neck (1.687 inch nut width, .860 inch thick at the 1st fret, 9.5 inch radius, 095 x.048 frets), vintage Asiatic ox bone nut, Gotoh classic vintage tuners, Wilkinson compensated brass saddle bridge, CTS 250k pots w/chromed brass barrel knobs (tone pot is a no-load), CRL 3-way pickup switch, Electrosocket jack cup and Switchcraft jack, .090 thick solid white custom pickguard, Seymour Duncan SM-1 AlNiCo Firebird mini-humbucker neck pup, custom Cavalier Lion Esquire® bridge pup (AlNiCo V mags, 10521 turns of 42AWG Formvar wire, 8.29k output). Setup with D'Addario 10-46 round wound nickel strings - ready for stage, studio or living room. Total weight is 5 pounds 8.5 ounces.




SOLD!



SOLD! GFS paulownia hardwood light and resonant body in ivory creme, Fender® ; Japan ambered matte satin finish TRO-C rosewood fingerboard maple neck (1.656 inch nut width, .860 inch thick at the 1st fret, 9.5 inch radius, 085 x.050 frets), vintage Asiatic ox bone nut, Gotoh classic vintage tuners, Wilkinson compensated brass saddle bridge, CTS 250k pots w/chrome barrel knobs (tone pot is a no-load), CRL 4-way pickup switch (bridge, bridge+neck in parallel, bridge+neck in series, neck), Electrosocket jack cup and Switchcraft jack, w/b/w pickguard, Bill Lawrence L290TL noiseless bridge pup and Neo-Vin vintage noiseless neck pup. Setup with D'Addario 10-46 round wound nickel strings - ready for stage, studio or living room. Total weight is 5 pounds 6.5 ounces.




SOLD!



SOLD! Esquire® partscaster, GFS Paulownia transparent red body, AP Fender® Japan TRO-W neck (1.687 inch nut width, .082x.052 frets, .850 thick at the first fret. 9.5 inch radius), classic vintage tuners, vintage bone nut, Wilkinson compensated brass saddle vintage bridge (supports both rear and top loading), parchment Esquire® pickguard, Duncan Broadcaster pickup, CTS 250k pots, CRL 3-way pup switch (pickup w/no tone pot, pickup w/tone pot, no pickup). Electrosocket Switchcraft jack. Total weight = 5lbs 2ozs. Setup with GHS 10-46 Nickel Boomers. This is one killer Esquire® that's got a woody, acoustic tone that just sings. Ready for stage, studio or that comfy living room sofa.



SOLD!



SOLD! GFS paulownia hardwood light and resonant body in mint green, Fender® ; Japan ambered matte satin finish TMO-FAT solid maple neck (1.659 inch nut width, 1 inch thick at the 1st fret, 9.5 inch radius, 080x.050 frets), Classic vintage tuners, Wilkinson compensated brass saddle bridge, vintage solid ivory pickguard, CTS 250k pots w/chrome barrel knobs (tone pot is a no-load!), CRL 4-way pickup switch (bridge, bridge+neck in parallel, bridge+neck in series, neck), Electrosocket jack plate and Switchcraft jack, Bill Lawrence L290TL noiseless bridge pup and Bill Lawrence L280TN noiseless neck pup. Setup with D'Addario 10-46 round wound nickel strings - ready for stage, studio or living room. Total weight is 5lbs 9ounces.



SOLD!



SOLD! I have a select stash of home-grown USA paulownia hardwood and I routed out a one piece Tele body, and Gerd Dagne did the stain and clear coats. As with all paulownia, the body is ultra light, very resonant and acoustic-like in tone. Fender® ; Japan ambered semi-gloss TRO-W neck (1.688 inch nut width, .850 inch thick at the 1st fret, 9.5 inch radius, 080x.050 frets), Gotoh vintage tuners, Schaller 470 roller top load bridge, CTS 250k pots w/Gibson speed knobs (master volume and master no-load tone), Bill Lawrence custom wound AlNiCo L90 pickup (P90 tone, no noise!), Switchcraft jack in a chrome Les Paul football mounting plate. Setup with D'Addario 10-46 round wound nickel strings - ready for stage, studio or living room. 5lbs 6ozs total weight.



SOLD!



SOLD! GFS paulownia hardwood light and resonant body in vintage creme, Fender® ; Japan ambered matte satin finish TMO-FAT solid maple neck (1.657 inch nut width, 1 inch thick at the 1st fret, 9.5 inch radius, 080x.050 frets), Gotoh vintage tuners, Wilkinson compensated brass saddle bridge, vintage solid black matte pickguard, CTS 250k pots w/chrome barrel knobs (tone pot is a no-load!), CRL 4-way pickup switch (bridge, bridge+neck in parallel, bridge+neck in series, neck), Electrosocket jack plate and Switchcraft jack, Bill Lawrence Keystone true single coil pickups. Setup with Everly 10-46 round wound nickel strings - ready for stage, studio or living room. Total weight is 5.9 pounds.



SOLD!



SOLD! GFS paulownia hardwood light and resonant body, gloss cherryburst w/bound flame maple top, Fender® ; Japan ambered matte satin finish SMO-C solid maple neck (1.657 inch nut width, .850 inch thick at the 1st fret, 9.5 inch radius, 080x.050 frets), Gotoh vintage tuners, Wilkinson compensated brass saddle bridge, vintage solid white pickguard, CTS 250k pots w/chrome barrel knobs, CRL 4-way pickup switch (bridge, bridge+neck in parallel, bridge+neck in series, neck), Bill Lawrence Deluxe Keystone AlNiCo V pickups, Les Paul jack plate and Switchcraft jack. Frets have been leveled and crowned. Setup with D'Addario 10-46 round wound nickel strings - ready for stage, studio or living room. 5lbs 7ozs total weight.



SOLD!



SOLD! Like-new condition GFS cherryburst solid paulownia body, AllParts Fender® Japan SMO-FAT neck with satin amber satin under hand rubbed polyU, (1" thick at the first and 12th frets, 1.658" nut width, .095 x .050 frets, 9.5" radius, heel truss nut), Gotoh vintage tuners, Australian water buffalo horn nut, Wilkinson vintage tremolo bridge, Fender® Tex-Mex AlNiCo V pickups, CRL 5-way, CTS pots (master volume, master no-load tone, neck pickup no-load volume), Switchcraft jack. Total weight = 6lbs 2ozs (NO, it's not neck heavy at all!!!). Setup with D'Addario 10-46 roundwounds. I'm seriously tempted to keep this one, she's that good! Great playability and tone that's ready for stage, studio or living room jams. Rock on ....



SOLD!



SOLD! GFS paulownia hardwood light and resonant body, gloss vintage cream finish, fender® japan tro-w rosewood neck (1.688 inch nut width, .850 inch thick at the 1st fret, 9.5 inch radius, 080x.050 frets), vintage staggered tuners, vintage cow bone nut, wilkinson compensated brass saddle bridge, crl 4-way pickup switch (bridge, bridge+neck in parallel, bridge+neck in series, neck), bill lawrence L200 noiseless alnico v pups, electrosocket jack cup and switchcraft jack. Setup with d'addario 10-46 round wound nickel strings. 5lbs 4ozs total weight.

OPTIONS: no pickguard, or black matte vintage Tele® ; pickguard.




SOLD!



SOLD! GFS paulownia hardwood light and resonant body, gloss black finish, fender® japan tro-w rosewood neck (1.688 inch nut width, .850 inch thick at the 1st fret, 9.5 inch radius, 080x.050 frets), tortoise layered hybrid Tele® ; pickguard, vintage staggered tuners, vintage cow bone nut, wilkinson compensated brass saddle bridge, crl 4-way pickup switch (bridge, bridge+neck in parallel, bridge+neck in series, neck), neo-vin noiseless neck pup, bill lawrence L290TL noiseless bridge pup, electrosocket jack cup and switchcraft jack. Setup with d'addario 10-46 round wound nickel strings. 5lbs 6ozs total weight.



SOLD!